Budnick Converting ®
CCT
M1511
Double Coated PET High Temp. Acrylic & Rubber
M1511 is a very unique, supported double-coated tape with rubber based adhesive liner side and a solvent acrylic adhesive on the air side. The liner side adhesive is designed for excellent wet out to a variety of substrates. Air-side is a very high heat PSA with dynamic laminating properties to many foams and rubbers. Generates excellent bond to low permeability substrates.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.7 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 115 oz/in |
| Adhesion (unwind) | 52 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 175° F |
| Max Long-Term Temp |
Product Features
- Differentially coated acrylic/rubber adhesive system
- Air side features high heat PSA with dynamic laminating properties to many foams and rubbers
- Construction is compliant for biological growth/fungal resistance per ASTM-4300
Markets Served
- Automotive
- Industrial
Adhesive Tape Applications
- Used in a variety of end use markets and is exceptional for difficult automotive applications
- Has been tested and approved against a variety of 'standard' automotive test specifications
- The polyester carrier offers additional dimensional support and enhanced die-cut ability characteristics
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.