Budnick Converting ®
DeWal Industries / Rogers Corp.
423-3
UHMW Polyethylene Film
423-3 is a 3 mil, UHMW polyethylene film with an aggressive permanent acrylic adhesive. The UHMW film provides an excellent low friction, non-stick surface in many ways similar to PTFE. The film has a very high tensile strength and is very tough and abrasion resistant. This tape has two primary applications automotive and mechanical. The 423 series has passed a series of automotive tests for use by GM, Ford and Daimler-Chrysler. Mechanical applications include chute liners, wear pads and guide rails.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | 18.00 lbs/in |
|---|---|
| Elongation | 300.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- The 423 series has passed a series of automotive tests for use by GM, Ford and Daimler-Chrysler.
- Aggressive permanent acrylic adhesive
- Excellent low friction, non-stick surface
- Very high tensile strength
- Very tough and abrasion resistant
Adhesive Tape Applications
- Automotive and mechanical
- Mechanical applications include chute liners, wear pads and guide rails
- Squeak and rattle prevention
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.