Budnick Converting ®
DeWal Industries / Rogers Corp.
500
Plasma Spray Masking Tape
500 is a 11 mil, one step plasma masking tape constructed of a silicone rubber/glass cloth backing coated with an aggressive high-temperature silicone adhesive. It will withstand grit blast and plasma spray process yet will remove cleanly. 500 has a higher tack than most other plasma masking tapes which allows it to easily conform to the most complex shapes of the Aircraft Industry. It is used as a one step masking tape in plasma flame spraying. It provides superior high temperature protection during both grit blasting and plasma metallization operations.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Silicone Rubber/Glass Cloth |
|---|---|
| Adhesive | Silicone |
| Thickness | 11 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- FAA Regulation GE-Standard Practices Manual Approved
- Pratt & Whitney PMC - 4630 Approved
- Rolls-Royce Aero Repair CSS13 Approved
- 500R has a higher tack than most other plasma masking tapes
- Aggressive high-temperature silicone adhesive
- Remove cleanly
- Higher tack than most
- Easily conforms to the most complex shapes of the Aircraft Industry
Markets Served
- Aerospace
Adhesive Tape Applications
- Used as a one step masking tape in plasma flame spraying
- Provides superior high temperature protection during both grit blasting and plasma metallization operations
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.