Budnick Converting ®
DeWal Industries / Rogers Corp.
810-2
Victrexr PeekT Film
810-2 is a 4 mil, extruded, virgin PEEK (polyetheretherketone) film has been surface modified on one side and coated with an acrylic adhesive. The acrylic adhesive is resistant to high humidity and harsh chemical environments while retaining good peel strength with clean removal. The surface modification enhances bond strength to other materials. Kraft paper release paper is applied to the adhesive side. The untreated side is lubricious, abrasion resistant, and free of pin holes. This tape has the best combination of friction and wear properties combined with high heat resistance, chemical resistance and electrical insulation. Tapes can be used on many different hard mating surfaces such as steel, ceramic or glass. Typical applications for the tape include sliding bearings, abrasion resistant wire wraps, and oil field equipment requiring abrasion resistance and electrical insulation.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | 36.00 lbs/in |
|---|---|
| Elongation | 165.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp |
Product Features
- Extruded, virgin PEEK (polyetheretherketone) film
- Resistant to high humidity and harsh chemical environments
- Good peel strength
- Clean removal
- Lubricious
- Abrasion resistant
- Free of pin holes
- Best combination of friction and wear properties combined with high heat resistance
- Chemical resistance
Adhesive Tape Applications
- Electrical insulation
- Can be used on many different hard mating surfaces such as steel, ceramic or glass
- Sliding bearings
- Abrasion resistant wire wraps
- Oil field equipment
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.