![](/images/watermark2.png)
![](/images/watermark2.png)
![](/images/watermark2.png)
![](/images/watermark2.png)
econOtape
PEFILM 4560
7 mil Low Density UV Polyethylene Film Tape
PEFILM 4560 is a 7 mil low density polyethylene film tape coated on one side with a synthetic rubber adhesive. The backing has been stabilized with additives to resist the effects of UV exposure. This tape leaves no residue on removal and maintains a water tight seal in all weather conditions. Its adhesive system remains permanently tacky and bonds well to most surfaces over a wide range of temperatures. PEFILM 4560 is designed for masking windows and doors in stucco applications. It is also ideal for polyethylene splicing or seaming in construction applications.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 7 Mils |
Tensile | 18.00 lbs/in |
---|---|
Elongation | 80.00% |
Adhesive Activation | Pressure |
Adhesion (unwind) | 60 oz/in |
Min. Application Temp | 40° F |
---|---|
Min. Service Temp | |
Max Short-Term Temp | |
Max Long-Term Temp |
Product Features
- Low Density Polyethylene Film
- Stabilized with Additives to Resist UV Exposure
- Clean Removable
- Maintains a Watertight Seal in All Weather Conditions
- Adhesive System Remains Permanently Tacky
Markets Served
- Industrial
- Commercial
Adhesive Tape Applications
- Masking For Stucco Applications
- Polyethylene Splicing Or Seaming In Construction
Adhesive Tape Colors
- Red
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.