Budnick Converting ®
Gaska Tape
LC710.188
Low Compression Foam Tape
LC710.188 is a 3/16'' closed-cell, low compression vinyl foam. Gaska Tape's LC700 Series is specially formulated, soft, closed-cell Polyvinyl Chloride foam that can be produced with or without adhesive on one side, as well as a permanent cast-on polyester film to the opposite side.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 188 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp |
Product Features
- Conforms to irregular surfaces and curves
- Alternative to low perm urethane where longer product life is necessary
- High-tack (A3) adhesive has a wide service temperature range
- Cushions and absorbs vibration and shock
- Ability to make a long life seal against air, moisture, light and dust penetration
- Insulates in thermal, electrical and sound applications
Markets Served
- Appliance
- Industrial
- Automotive
Adhesive Tape Applications
- Appliance
- Automotive
- Industrial
- Used in conjunction with thin gauge plastics and sheet metal to prevent over-bowing or over-flexing
Adhesive Tape Colors
- Black
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.