Budnick Converting ®
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | |
| Thickness | 4.9 Mils |
| Tensile | 17.00 lbs/in |
|---|---|
| Elongation | 3.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 12 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Specification Conformance: MIL-T-38727, Type II
- Low Tack
- Proper balance of strength in the base sheet together with an ideal level of adhesion
- Adhesive removes cleanly and easily from a variety of surfaces
- "Machinable" (i.e. does not gum up drill bits, etc.).
Adhesive Tape Applications
- Used for protection of smooth, polished surfaces both finished goods andlor in-process
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.