Budnick Converting ®
Intertape Polymer
BT100R-80
Media Blasting Mask (Super Thick)
BT100R-80 is a high quality, durable rubber coated with an advanced water based acrylic adhesive. It is typically used for shot peening and media blasting masking. The uniform thickness allows maximum blast time up to 100 psi. The special rubber allows BT100 R to conform tightly around curves and uneven surfaces. The high-tack, bonds quickly to clean surfaces. The application of 'hot-glue' bead along tape edges is recommended due to increased dwell and limited blast nozzle movement of the robotic stripping heads. BT100 R removes in one piece after exposure to blasing.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Rubber |
|---|---|
| Adhesive | Acrylic |
| Thickness | 85 Mils |
| Tensile | 9.00 lbs/in |
|---|---|
| Elongation | 300.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Std Roll Length: 10.00 yards
- High quality, durable rubber
- Coated with advanced water-based acrylic adhesive
- Uniform mil thickness
- Rubber conforms tightly around curves and uneven surfaces
- High-tack
- Clean, one-piece removal
- Withstands blast times up to 100 psi
- Prevents small bits of paint media blast and other particles from infiltrating and damaging sensitive surfaces, components and control systems
- Offers superior surface protection and seal
Adhesive Tape Applications
- Shot peening
- Plastic Media Blasting (PMB) for removal of paints from aircraft or other surfaces
Adhesive Tape Colors
- Cream
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.