Budnick Converting ®
Intertape Polymer
PG8
Paper Tape
PG8 is a 7.6 mil, smooth crepe paper masking tape designed for narrow roll width applications to a variety of surfaces. Can be exposed to forced drying conditions for 30 minutes at 325°F with clean and easy one piece removal after bake from a hot to warm surface. Special release coating provides an 'extra measure' of moisture and solvent resistance. Especially suited for marine / fiberglass mould masking. Not recommended for outdoor exposure.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 7.6 Mils |
| Tensile | 24.00 lbs/in |
|---|---|
| Elongation | 6.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 34 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 325° F |
| Max Long-Term Temp |
Product Features
- Qucik stick to steel is 18oz/in
- Smooth crepe paper
- Can be exposed to forced drying conditions for 30 minutes at 325°F with clean
- Easy one piece removal after bake from a hot to warm surface
- Special release coating provides an 'extra measure' of moisture and solvent resistance
Adhesive Tape Applications
- Especially suited for marine / fiberglass mold masking
- Not recommended for outdoor exposure
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.