Budnick Converting ®
John Deal Coatings Inc.
A200T-STD
Polyester Supported Laminating Adhesive
A200T-STD is a polyester supported, acrylic laminating adhesive designed for fabricating applications where an aggressive acrylic is needed. A200T-STD exhibits excellent adhesion to a wide variety of high surface energy foams and rubbers, including ether urethanes when heat assist is utilized. It is coated with an aggressive cross-lined acrylic adhesive that exhibits excellent tack, peel, and moderate shear strength, and is resistant to mild plasticizers, UV light, heat, humidity, and most solvents. A200T-STD is coated on a premium 78lb. bleached densified kraft designed for low release and excellent die cutting ability.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4.25 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 170 oz/in |
| Adhesion (unwind) | 170 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -35° F |
| Max Short-Term Temp | 275° F |
| Max Long-Term Temp | 200° F |
Product Features
- Excellent adhesion to a wide variety of high surface energy foams and rubbers
- Excellent tack and peel
- Moderate shear strength
- Resistant to mild plasticizers, UV light, heat, humidity, and most solvents
Markets Served
- Industrial
Adhesive Tape Applications
- Designed for fabricating applications where an aggressive acrylic is needed
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.