Budnick Converting ®
MACtac Inc.
IB112-60
Double Coated PET Tape
IB1122-60 consists of a .5mil PET carrier coated on both sides with 2.0 mils of rubber pressure sensitive adhesive. The adhesive is protected by a two-side silicone coated 60# white super-calendared Kraft liner, available with either medium-easy release (ER) or medium-tight release. This product is designed for applications that require high initial tack to a wide variety of substrates including open cell foams and low surface energy materials.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 2.9 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) | 118 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 160° F |
| Max Long-Term Temp |
Product Features
- High initial tack and adhesion
- Excellent adhesion to a wide variety of substrates
- Performs well on rough or uneven surfaces
- Excellent handling and diecutting.
- Exceptional performance on most foam and rubber materials.
Markets Served
- Commercial
- Extruders of Plastic and Rubber
- Industrial
Adhesive Tape Applications
- Foam bonding applications
- Felt and fabric bonding applications
- Carpet securement
- General purpose mounting & bonding applications
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.