Budnick Converting ®
MACtac Inc.
IB1175ER
Double Coated Polyester Tape
IB1175ER consists of a thin polyester film coated on both sides with an aggressive, general purpose rubber based adhesive. It was designed for general purpose bonding applications such as in the gasket, seal and trim markets. Typically used for bonding to foams, felts, primed wood, paper, metal, plastics and most low or unplasticized substrates. It has an excellent balance of economy versus performance. The polyester carrier provides dimensional stability and superior die cutting properties.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.4 Mils |
| Tensile | 10.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesion (liner) | 144 oz/in |
| Adhesion (unwind) | 144 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp |
Product Features
- Quick Tack 7.5#/sq.in. to Stainless steel
- Shear strength is 300+ hours to failure
- Aggressive
Adhesive Tape Applications
- General purpose bonding of gasket, seal & trim
- Used for bonding foams, felts, cloths, primed wood, paper, metal, plastics,unplasticized substrates
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.