Budnick Converting ®
MACtac Inc.
IB1250TR
High Tack/Removable Double Coated Film Tape
IB 1250TR consists of a 1 mil, carrier film coated on both sides with different adhesive strengths. The unwind side is an aggressive, general purpose, permanent adhesive. The liner side utilizes a low adhesion, removable formulation. It was designed for laminating permanently to the initial substrate. The second or final bond would provide removable adhesion from most substrates. This construction permits the production of removable or repositionable products such as gaskets, protective pads and other temporarily bonded items.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.1 Mils |
| Tensile | 22.00 lbs/in |
|---|---|
| Elongation | |
| Adhesion (liner) | 6.4 oz/in |
| Adhesion (unwind) | 128 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp |
Product Features
- Differencial adhesive on either side of carrier
- Quick tack is 10 unwind & 0.5 liner #/sq.in
- Shear is 300+ hours to failure
- Tensile strength is 22 unwind & 36 liner side #/in
- Elongation 270% unwind & 80% liner
Adhesive Tape Applications
- Permits the production of removable or repositionable products such as gaskets, protective pads and other temporarily bonded items
Adhesive Tape Colors
- Clear
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.