Budnick Converting ®
MACtac Inc.
IB2125
***Discontinued*** Double Coated Polyester
Discontinued IB2125 consists of a thin 3.5 mil, polyester film coated on one side with an aggressive, modified acrylic pressure- sensitive adhesive and on the opposite side with high-performance, rubber-resin pressure sensitive adhesive. IB-2125 utilizes an 80# SCK release liner that provides a good combination of lamination, die-cutting & end-use application performance. The "unwind side" modified-acrylic PSA provides excellent adhesion and compatibility with a wide range of foam, sponge, rubber, cork and other gasket materials. The "liner side" rubber-based PSA provides excellent adhesive performance on many end-use substrates with exposure to demanding application conditions. The polyester carrier provides dimensional stability and superior die cutting properties.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.5 Mils |
| Tensile | 10.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesion (liner) | 176 oz/in |
| Adhesion (unwind) | 128 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 160° F |
| Max Long-Term Temp |
Product Features
- Quick Tack is 6.0 #/sq. in.
- Static Shear is 15+ hours to failure on the Unwind saide & 300+ for the rubber
- Not recommended for use in contact with aliphatic or aromatic hydrocarbons
- Polyester film coated on one side with an aggressive, modified acrylic pressure- sensitive adhesive and on the opposite side with high-performance, rubber-resin pressure sensitive adhesive
- Available as IB2125L12 with a 12 pt board liner
- Resistant to water, detergent, and alcohol
- The "unwind side" modified-acrylic PSA provides excellent adhesion and compatibility with a wide range of foam, sponge, rubber, cork and other gasket materials
- The "liner side" rubber-based PSA provides excellent adhesive performance on many end-use substrates with exposure to demanding application conditions
- The polyester carrier provides dimensional stability and superior die cutting properties
Adhesive Tape Applications
- Provides a good combination of lamination, die-cutting & end-use application performance
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.