Budnick Converting ®
MACtac Inc.
IB2151
***Discontinued*** Double Coated PET
Discontinued IB-2151/IB-2156 consists of a thin polyester film coated on both sides with an high tack, modified acrylic pressure sensitive adhesive. The product is supplied self-wound on a 60# densified kraft release liner. The unique acrylic adhesive bonds to a wide range of materials, including most plastics. IB-2151/IB2156 provides the temperature resistance required by many automotive and appliance applications without sacrificing peel and tack adhesion. IB-2151/2156 has been designed with extra adhesive on the "Unwind" side to provide maximum adhesion to rough or porous surfaces. The polyester carrier provides excellent dimensional stability and die cutting properties.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | 10.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesion (liner) | 3.5 oz/in |
| Adhesion (unwind) | 4.5 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- Quick Tack is 6.0/4.0 #/sq.in.
- Shear hours to failure are 300+
- Resistant to water, detergent and alcohol, aliphatic and some aromatic hydrocarbons
- Not recommended for use in contact with solvents such as ketones, esters and some chlorinated hydrocarbons.
- Thin polyester film coated on both sides with an high tack, modified acrylic
- Provides the temperature resistance required by many automotive and appliance applications without sacrificing peel and tack adhesion
- Designed with extra adhesive on the "Unwind" side to provide maximum adhesion to rough or porous surfaces
- The polyester carrier provides excellent dimensional stability and die cutting properties
Adhesive Tape Applications
- Bonds to a wide range of materials, including most plastics.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.