Budnick Converting ®
MACtac Inc.
IF4020
***Discontinued*** Rubber Thermosetting Adhesive
**Discontinued**IF4020 is a 1 mil thick dry film of thermosetting adhesive (Synthetic Rubber-synthetic Resin). The adhesive can typically be transferred from the protective release liner to the bondable substrate with the use of modest heat (approx. 150°F). The selected cure schedule should then be performed. When properly cured, it exhibits good strength properties at low and elevated temperatures. It also exhibits excellent plastic flow which contributes toward obtaining 100% contact with the substrates to be bonded
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Rubber |
| Thickness | 1 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Heat |
| Adhesion (unwind) |
| Min. Application Temp | 350° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp |
Product Features
- Disc Shear strength 1750psi @73°F
- Heat-activated dry film adhesive
- Provides permanent adhesion to a variety of wet-laid fibers, carbon, and other friction materials
- Addresses solvent-evaporation and adhesive quantity issues common with liquid adhesives
- Demonstrates high strength properties at low and elevated temperatures
- Excellent chemical resistance
- Ideal for high-temperature resistance applications
- Exhibits excellent plastic flow, contributing toward obtaining 100% contact with substrates
Markets Served
- Automotive
- Aerospace
- Industrial
- Truck and trailer body
- Electronics
Adhesive Tape Applications
- Bonding friction materials
- Ideal for parts subjected to high operating temperatures, energy absorption and pressures, as well as exposure to chemicals such as transmission and brake fluids
Adhesive Tape Colors
- Black
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.