Budnick Converting ®
MACtac Inc.
IM1800
Double Coated Polyethylene Foam
IM1800 is a 1/32", white, closed cell, 6# polyethylene foam coated on both sides with a rubber adhesive. They offer a high shear strength adhesive for ultimate holding power for indoor applications. It aggressively bonds to most surfaces including low energy materials, the foam carrier provides a gap filling function that aids in the joining of uneven or irregular surfaces.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 36.45 Mils |
| Tensile | 6.00 lbs/in |
|---|---|
| Elongation | 400.00% |
| Adhesion (liner) | 96 oz/in |
| Adhesion (unwind) | 96 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp |
Product Features
- Shear strength is 300+ hours to failure when stainless steel is loaded with1000 g/sq.in@72°F
- Typically the adhesion exceeds the strength of the foam in the range of 6-9 lbs/in
- Excellent shear strength
- Highly conformable
- Highly compressible
- Resistant to water, detergent & alcohol
Adhesive Tape Applications
- Bonding irregular, uneven or contoured surfaces
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.