Budnick Converting ®
MACtac Inc.
IM1830A
MACmount 1/16" Mounting Foam
IM1830A consists of 1/16" white, closed-cell, polyethylene foam coated both sides with high-shear rubber-based pressure sensitive adhesive. The adhesives are protected by a C2S 80# semi-bleached, densified kraft release liner.
IM1830A is generally used where high holding power is desired for indoor applications. The aggressive adhesive adheres well to most surfaces including low energy materials such as polyethylene and polypropylene. The 1/16" white foam carrier provides a gap filling function that aids in the joining of uneven or irregular surfaces.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 68 Mils |
| Tensile | 6.00 lbs/in |
|---|---|
| Elongation | 400.00% |
| Adhesion (liner) | 96 oz/in |
| Adhesion (unwind) | 96 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 180° F |
Product Features
- High holding power
- 1/16" white foam carrier provides gap filling function
- Aggressive adhesive adheres well to most surfaces
- Resistant to water, detergent, and alcohol
Markets Served
- Commercial
- Construction
- Paper products
- Commercial printing
- Signage, Banners, & Printing
Adhesive Tape Applications
- Bonding/Mounting
Adhesive Tape Colors
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.