Budnick Converting ®
Novagard / Foam Seal
723 UL
AlumaSeal 723 UL
Aluma-Seal 723 is a UL 723 classified aluminum covered PVC with acrylic adhesive one side. The foam adheres to the aluminum to achieve a material that will conform to irregular surfaces with a protective aluminum barrier. Product is UL listed from 1/16" to 1/4" thickness with an acrylic PSA. Aluma-Seal 723 is used as an insulator for HVAC plenums, pipes, and pans to prevent condensation build-up on surfaces to which it is applied. It reduces vibration, deadens sound, and seals ductwork, holes, and seams in HVAC applications. It remains pliable between -20°C to 78°C.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 12 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -4° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 172° F |
Product Features
- Conforms well to irregular surfaces
- Provides protective aluminum barrier
- UL 723 classified
- Prevents condensation build-up
- Can be die cut to specification
Markets Served
- Industrial
Adhesive Tape Applications
- HVAC Insulation
- Sound Damping
- Vibration Damping
- Heat Reflection
Adhesive Tape Colors
- Gray
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.