Budnick Converting ®
Permacel/Nitto Denko America
744S
Radial Lead Component Packaging Tape
744S is a 7 mil, radial lead, component packaging tape. It is recommended especially for packaging electronic components with radial and stand-up axial leads. 744S securely anchors radial lead components to a continuous flexible carrier, making the components suitable for use with automatic printed circuit board insertion equipment.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | |
| Thickness | 7 Mils |
| Tensile | 28.00 lbs/in |
|---|---|
| Elongation | 13.80% |
| Adhesive Activation | Heat |
| Adhesion (unwind) |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Reduces misalignments and insertion equipment downtime
- Excellent long-term aging properties
- Highly practical for the extended storage of packaging components
- Available in long-length rolls or money-saving spools
- Eliminates manual insertion operations as well as complicated lead-forming operations
- Adhesive activates quickly allowing equipment to run at maximum line speeds & permits drive holes to be die-cut without fouling dies
Adhesive Tape Applications
- Works with automatic equimpent to firmly anchor component leads to a continuous carrier
- Assures trouble-free use with automatic dispensers
Adhesive Tape Colors
- Natural
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.