Budnick Converting ®
Permacel/Nitto Denko America
P243
***Discontinued*** Film/Non-Woven Insulating
*DISCONTINUED BY PERMACELPlease use Compare-A-Tape to locate a substitute. P243 is a 6 mil, polyester film/polyester non-woven, electrical insulating tape. It is engineered for use where burrs or sharp edges cause an insulating problem on all types of wire splices/connections. One of the most puncture and tear-resistant electrical insulating tapes.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 6 Mils |
| Tensile | 40.00 lbs/in |
|---|---|
| Elongation | 30.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 302° F |
| Max Long-Term Temp |
Product Features
- Outstanding puncture, tear and abrasion resistance
- High tensile strength for coil banding/bundling
- Excellent adhesion for hold-down & anchoring
- Backing material: 1-mil = polyester film/laminated & 3-mil = polyester non-woven
- Unwind @ 150FPM = 10 oz./in.
- Rec. bake cycle = 2 hrs. @ 275° F. & 1 hr. @ 302° F.
- Flagging resistance = 0 on 1/2" mandrel @ 24 hrs.
- High purity for corrosion-sensitive applications
- High moisture resistance provides superior varnish & resin bonding to tape backing
Adhesive Tape Applications
- Connection insulation pad
- Lead or terminal board anchor
- Coil banding
- Terminal/lead pad anchoring & outer protective wrap in the manufacture of fine wire stick wound coils
- End turn bundling
- Insulating lead connections
- Anchoring leads in Class 130° C machine tool servo motors
- Slot cell edge reinforcing
Adhesive Tape Colors
- White
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.