Budnick Converting ®
Permacel/Nitto Denko America
P245
***Discontinued*** Film/Non-Woven Insulating
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P245 is a 5.5 mil, polyester film/polyester non-woven, electrical insulating tape. It is recommended for use in manufacturing bobbin, stick and form wound coils. P245 is one of the most popular electrical insulating tapes.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 5.5 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 50.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 302° F |
| Max Long-Term Temp |
Product Features
- Highy versatile
- Tear & puncture resistant
- Outstanding adhesion, with low roll unwind
- Unwind @ 150 FPM = 4 oz./in.
- Flagging resistance = 0 on 1/4" mandrel @ 24 hrs.
- Rec. bake cycle = 2 hrs. @ 275° F. & 1 hr. @ 302° F.
- UL component recognized
- Excellent dielectric strength, with non-corrosivity
Adhesive Tape Applications
- Cross-over & barrier insulation
- Insulating lead connections, rigidly anchoring leads & bundling end turns in sub-fractional & fractional horsepower motors
- High-volume coil wrapping uses like calculator power supplis & rechargers
- Holding winding starts & finishes
- Coil end insulation
- Coil banding
- Terminal board pads
- Outer protective wraps
Adhesive Tape Colors
- Black
- Tan
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.