Budnick Converting ®
Permacel/Nitto Denko America
P246
***Discontinued*** Film/Glass Electrical Tape
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P246 is a 6.5 mil, polyester film/glass filament, electrical insulating tape. It is engineered for "third hand" holding applications in coil manufacturing. P246 is particularly effective for heavy-duty holding uses involving heavy magnet wire, thick boardy insulation materials and heavy-gauge flat strip conductors.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.5 Mils |
| Tensile | 275.00 lbs/in |
|---|---|
| Elongation | 5.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 302° F |
| Max Long-Term Temp |
Product Features
- High tear & puncture resistant
- Unwind @ 150 FPM = 12 oz./in.
- Rec. bake cycle = 2 hrs. @ 275° F. & 1 hr. @ 302° F.
- Flagging resistance = 0 on 1/2" mandrel @ 24 hrs.
- High tensile strength & high adhesion
- Heavy-duty holding
Adhesive Tape Applications
- Phase or cross-over insulation in large fractional & small integral horsepower motors
- Holding down insulating outer wrap
- Banding form wound coils for holding shape
- Banding/bundling conductors & lead anchor in auto field coil
- To prevent movement of turns in layer wound coils
Adhesive Tape Colors
- Natural
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.