Budnick Converting ®
Permacel/Nitto Denko America
P258
***Discontinued*** Electrical Insulating Tape
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P258 is a 2.5 mil, printable, polyester electrical insulating tape. It is ideal for pre-printed outer protective wraps and barrier insulation. P258 is recommended for component body printing without solvent wiping.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 2.5 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 45 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Prevents print transfer on roll unwind after months of storage
- Thin, comfortable, high tensile strength & tear resistant
- Permits applications in solvent environments without additional thermosetting
- Permits wrapping in very small diameters with zero flagging
Adhesive Tape Applications
- Outer wrap on film wrap & film-foil capacitors
- High speed machine applications
- As wire markers on pre-printed P258 & as cable ties on unprinted
- Outer protective wrap & component identification in small bobbin wound transformer coils & as barrier insulation between windings
Adhesive Tape Colors
- Yellow
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.