Budnick Converting ®
Permacel/Nitto Denko America
P265
Epoxy Reinforced Insulating Tape
P265 is a 6.2 mil, epoxy reinforced, insulating tape. It is engineered for use by manufactures of bobbin, stick and form wound coils. P265 is directly printable and flame retardant which makes it an ideal outer wrap for transformer coils.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Reinforced Epoxy |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.2 Mils |
| Tensile | 40.00 lbs/in |
|---|---|
| Elongation | 20.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Outstanding puncture, tear & abrasion resistant
- Offers the necessary insulation build with a minimum number of wraps
- Special backsizing allows direct printability
- UL component recognized
- Passes UL 510 flammability test
- Unwind @ 150 FPM = 30 oz./in.
- Provides excellent dielectric strength with non-corrosivity
Adhesive Tape Applications
- Identification & insulating outer protective wraps for transformer & relay coils also requiring flame retardancy
- Usable for terminal board pads & protective outer wraps on shaded pole motors
- Barrier insulations & outer wraps over fine wire
- Outer wrap for transformer coils
- Bundling end turns
- Insulating connections
- Phase & wind separator insulation in sub-fractional & fractional horsepower motor windings
- Construction tape for wide range of holding applications
Adhesive Tape Colors
- White
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.