Budnick Converting ®
Permacel/Nitto Denko America
P286HD
***Discontinued*** Polyester Elec. Insulating
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P286HD is a 3.3 mil, printable, polyester film, electrical insulating tape. It is ideal for film-foil and film wrap capacitors. P286HD is an outstanding answer to minimum insulation build-up requirements. It is designed for the cost-conscious manufacturer of bobbin and stick wound coils and fractional horsepower motors who demands optimal electrical properties as well as performance dependability.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.3 Mils |
| Tensile | 50.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Magnet wires will not show through due to the white color
- High tensile strength promotes good, tight coils while combatting dispensing breaks
- Provides good shelf life
- It is directly printable, flame retardant & conformable
- Solvent resistant adhesive eliminates flagging & the need for pre-bake cycles
- Flamability rating = passes UL 510 Test
- Because of its thinness, more magnet wire can be would on a bobbin
- Fewer wraps are required for the same voltage requirements
- Coils run cooler & are more compact
Adhesive Tape Applications
- Interwinding barrier insulation & outer insulation wrap on pulse transformer & choke coils where flame retardancy & solvent resistance are vital
- Lead connecting insulation pad
- Lead & terminal board anchor on large bobbin & stick wound coils
- Machine or hand applied outer wrap on large, heavy-duty film wrap & film-foil discpensers
Adhesive Tape Colors
- White
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.