Budnick Converting ®
Permacel/Nitto Denko America
P430
2-Mil PTFE Film Tape
P430 is a 3.5 mil, PTFE film tape. It is engineered primarily for anti-friction masking, flashing, release and separator applications where a clean, slick surface is required to speed up the movement of materials or reduce equimpent wear. P430 is ideal as a liner for chutes and rails, as flashing tape, as a separator tape to prevent electrolytic corrosion of dissimilar metals, or as a high temperature release film.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PTFE - Hi Modulous |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.5 Mils |
| Tensile | 28.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Chemically inert
- Even, smooth roll unwind
- Superior adhesion
- Solvent & fuel resistant
- Strips cleanly and easily
- Used as a high temperature release surface on heat sealer bars & rollers
- Anti-friction masking, flashing, release and separator applications
Adhesive Tape Applications
- Low coefficient of friction is ideal for lining conveyor guides or wrapping rails
- Flashing tape applications
- Liner for chutes & rails
- High-temperature release film on heat sealers & bars
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.