Budnick Converting ®
Permacel/Nitto Denko America
P733
***Discontinued*** Paper Masking
P733 is obsolete the alternative is P703. P733 is a 6.5 mil, ultra-high temperature, paint masking tape. It removes cleanly from hard-to-release-from surfaces like anodized aluminum, phosphatized steel and dichromated magnesium. P733 is also used for holding and bandoliering electronic capacitors and resistors.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.5 Mils |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | 5.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp | 300° F |
Product Features
- Ultra-high temperature
- Special white adhesive removes easily with no adhesive transfer
- Smooth backing & adhesive coating
- Withstands temperature cycles of 300°F up to 5 hours and 350°F for 3 hours
- Specifically designed to release cleanly from anodized/alodized aluminum, dichromated magnesium & phosphated steel
- Excellent surface contact for distinct color-line separation
- Meets the stringent requirements of the airline industry
Adhesive Tape Applications
- High temperature paint masking
- Masking hard-to-release-from metals
- Bandoliering electronic components
- Masking applications where high hold is vital
Adhesive Tape Colors
- Tan
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.