Budnick Converting ®
Saint-Gobain
K255
Single Coated Polyimide Tape
K255 has been replaced by 2345-1. K255 is a 2.5 mil, single coated, polyimide tape with high temperature, Dimethyl silicone adhesive. It is often used for applications that require holding, insulating, or wrapping. K255 is chosen for gold finger protection during wave solder applications.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Polyimide |
|---|---|
| Adhesive | Silicone |
| Thickness | 2.5 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 50.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 20 oz/in |
| Min. Application Temp | 20° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Excellent mechanical & electrical properties
- Excellent dielectric strength
- High conformability
- Resistance to cut through, impact & abrasion resistant
- High temperature Dimethyl silicone adhesive
Adhesive Tape Applications
- Used for applications that require holding, insulating or wrapping
- Gold finger protection during wave solder applications
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.