Budnick Converting ®
Saint-Gobain
K271
Thermally Conductive Kapton® Tape
Thermacool® K271 is a 4.5 mil thermally conductive Kapton® film and silicone rubber. The 1 mil thermally conductive Kapton® is coated on one side with 1.5 mil of thermally conductive acrylic adhesive and the other with 2 mils of thermally conductive silicone rubber. K271 was designed for use as a heat transferring gaskets for high performance electronics where low thermal resistance and high dielectric strength are required.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Polyimide |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | 20° F |
|---|---|
| Min. Service Temp | -20° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp |
Product Features
- Excellent dielectric strength
- Conformable surface
- Die cuttable
- .60 W/mK Thermal Conductivity
Markets Served
- Electronics
- Aerospace
Adhesive Tape Applications
- Heat transferring gaskets for high performance electronics where low thermal resistance & high dielectric strength are require
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.