Budnick Converting ®
Saint-Gobain
M823
2.8 Mil Polyester Film Tape
M823 is a 2.8 mil, quick stick, polyester splicing tape with silicone adhesive on one side and a release coating on the opposite side. M823 is used most often in the graphic arts industry. It offers superior bonding to a wide variety of treated papers, films and foils.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Silicone |
| Thickness | 2.8 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 33 oz/in |
| Min. Application Temp | 20° F |
|---|---|
| Min. Service Temp | -50° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp |
Product Features
- Silicone release coating on top side
- Release liner on bottom side
- Super quick stick
- Resists damage from sharp edges
- Highly conformable
Adhesive Tape Applications
- Bonds to a variety of treated papers, films & foils
- Recommended for all splicing applications, including in oven splices where good wet out capabilities are critical
Adhesive Tape Colors
- Blue
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.