Budnick Converting ®
Saint-Gobain
V2206
High Strength, Open Cell PU Foam Glazing Tape
V2206 is a .1875" thick, open cell polyurethane foam glazing that is adhesive coated two sides. It is a structural glazing and cladding spacer system for shop fabrication. It is also available single coated and linerless as, TBX206.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PU - Polyurethane |
|---|---|
| Adhesive | Acrylic |
| Thickness | 187.5 Mils |
| Tensile | |
|---|---|
| Elongation | 105.00% |
| Adhesion (liner) | |
| Adhesion (unwind) |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp |
Product Features
- Density=22#/cu.ft.
- Tensile Strength=130PSI
- Dynamic Tensile Adhesion=45PSI
- Dynamic Shear Adhesion=30PSI
- Static Shear Adhesion (1 PSI load)= 2000+hours
- Thermal Conductivity=.55
- Ultraviolet Resistance: 3000hrs. of exposure
- Migratory staining of Acrylic enamel: No staining after 200 hours of ultraviolet at 140°F
- Open cell structure allows air and moisture to reach the silicone permitting optimum curing
- High strength polyurethane foam substrate is chemically compatible with all silicones tested
- Low thermal conductivity foam substrate reduces heat transfer and inhibits condensation on windows, doors and metal systems
- Excellent resistance to weather, fungi and oxidation
- Superb spacer for two and four-sided structural silicone glazing systems
- Speeds shop fabrication of unitized panels
- Easy to handle
- Suitable for die cutting
Adhesive Tape Applications
- Structural silicone glazing
- Thermal break on storm window and doors
- Curtain wall
- Die cut for vibration dampening
Adhesive Tape Colors
- Black
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.