Budnick Converting ®
Scapa Tapes North America
556
Polymide Film Tape
556 is a 2.6 mil, polyimide film tape. It is primarily used for high temperature masking and protects circuit boards gold finger contacts during wave solder or hot air leveling process.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Polyimide |
|---|---|
| Adhesive | Silicone |
| Thickness | 2.6 Mils |
| Tensile | 30.00 lbs/in |
|---|---|
| Elongation | 60.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 23 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- Thin and conformable enabling masking of uneven surfaces
- Wide operating temperature range up to 500°
- Removes cleanly without adhesive residue after exposure to heat and/or chemicals
- High strength backing provides superior puncture, tear, and abrasion resistance
- Resistant to chemical attack
- Excellent electrical insulation
- UL approved *E175052(M)
- Flame retardant
Adhesive Tape Applications
- High temperature masking
- Protection of circuit board gold finger contacts during wave solder or hot air leveling process
Adhesive Tape Colors
- Amber
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.