Budnick Converting ®
Scapa Tapes North America
650
Wave Solder Tape
650 is a 7.0 mil, wave solder tape. It is primarily used for protecting printed circuit board components during the wave solder process. 650 is a specially trearted paper, single coated with a high performance silicone adhesive.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Proprietary |
|---|---|
| Adhesive | Silicone |
| Thickness | 7 Mils |
| Tensile | 40.00 lbs/in |
|---|---|
| Elongation | 3.50% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -22° F |
| Max Short-Term Temp | 221° F |
| Max Long-Term Temp |
Product Features
- Extremely low electrostatic discharge at unwind eliminating PCB degradation
- Excellent heat resistance
- Removes cleanly after processing
- Carrier is a specially treated paper laminated with a polyester film
Adhesive Tape Applications
- Protection of gold plated finger tabs, assembly holes, and components through flux, pre-heat and solder temperatures
- High temperature masking tape in the clean room environment where low static charge is desired
Adhesive Tape Colors
- Tan
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.