Budnick Converting ®
Scapa Tapes North America
S662
Dublfilmr Double Coated Polyester Film
Dublfilmr S662 is a 3.2 mil, double coated polyester film incorporating an aggressive rubber based pressure sensitive adhesive for consumer and industrial assembly applications. It exhibits high tack and peel with durable adhesion to a variety of substrates including low surface energy films such as polyolefins. It also provides good adhesion to a variety of foams including ether and ester polyurethanes.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.2 Mils |
| Tensile | |
|---|---|
| Elongation | 50.00% |
| Adhesion (liner) | 160 oz/in |
| Adhesion (unwind) | 160 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | 40° F |
| Max Short-Term Temp | 110° F |
| Max Long-Term Temp |
Product Features
- Aggressive permanent rubber adhesive on both sides
- Bonds well to a variety of substrates
- Polyester film adds dimensional stability and strength
- Holding power: PSTC 7 mod., 4.4 psi @RT > 24 hours
Adhesive Tape Applications
- Foam fabrication
- Attach decorative trim, cork and felt
- Splicing of printing and coating webs
- Bond abrasive disks
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.