Budnick Converting ®
Scapa Tapes North America
S847VA
Double Coated Foam Mounting Tape
Duofoamr S847VA is a 254.0 mil, double coated foam mounting tape. It is primarily used for assembly of wing mirrors and interior components.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 254 Mils |
| Tensile | 50.00 lbs/in |
|---|---|
| Elongation | 290.00% |
| Adhesion (liner) | 60 oz/in |
| Adhesion (unwind) | 60 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 160° F |
| Max Long-Term Temp |
Product Features
- Rubber based adhesive has good specific adhesion to a wide variety of surfaces
- High adhesive coat weight aids in adhesion to irregular surfaces
- Good quick stick makes application easy
- High shear strength gives high load bearing ability
- Foam gives good thermal insulation properties
- Composite die cuts easily
- Adhesive color is clear to light yellow
- Holding power: (PSTC Method #7 mod./178°) 4.4 psi (1/2"x1"x1000g) @ RT > 1440 min.
- Tear Resistance (pli)
Adhesive Tape Applications
- Assembly of wing mirrors and interior components
- NVH
- Interior trim
Adhesive Tape Colors
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.