Budnick Converting ®
Scapa Tapes North America
SP407T
Dublfilmr Double Coated Tissue
Dublfilmr SP407T is a 5.5 mil, double coated, tissue that contains an extremely aggressive, high tack, high peel, acrylic pressure sensitive adhesive. It is primarily used for assembly aid, bonding to EPDM rubber and foam fabrication.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Tissue |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 210 oz/in |
| Adhesion (unwind) | 210 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Exceptionally high tack and peel
- Tissue carrier adds strength and dimensional stability; yet is highly conformable
- Bonds well to low surface energy plastics
- Excellent adhesion to ether and ester foams
- Excellent resistance to environmental extremes
- Initial peel adhesion to stainless (PSTC 3 mod.) 20 min @ RT = 54.4 oz/in
- Holding power (PSTC 7 mod./178°) 2.2 psi (1"x1"x1000g) @ RT = 118 hours
- Heat resistance (PSTC 7 mod./178°) 1.1 psi (1"x1"x500g @ 158° = 3.0 hours
Adhesive Tape Applications
- Foam fabrication
- Difficult splicing applications
- Bonding to EPDM rubber
- Assembly aid
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.