Budnick Converting ®
Scapa Tapes North America
UB10
Unsupported Adhesive Transfer
Unifilmr UB10 is a 1 mil, unsupported adhesive transfer. It is primarily used for nameplates, faceplates, and bonding to low surface energy plastics. It is also used for foam gasketing or sound attenuation, application of decorative parts and applications where high initial adhesion is required.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 1 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 107 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -50° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Adhesive film laminates well to a variety of substrates, including untreated polyolefins
- Adhesive gives immediate high bonds
- Adhesive is clear and has excellent UV resistance, and humidity resistance
- UL recognition to UL standard #969 for Marking & Labeling Systems
- Approved by General Electric for use of Lexan
- Peel adhesion (PSTC 1 Mod./180°) 20 min. @ RT = 57 oz/in
- Peel adhesion (PSTC 1 Mod./180°) 1 wk. @ 158°F (70°C) to untreated polypropylene = 24 oz/in
- Holding power (PSTC 7 Mod./178°) 4.4 psi (1/2x1x1000g) @ RT = 2 hours
- Humidity resistance % peel retention after 1 wk. @ 100°F (38°C)/100% RH = 100%
- Water resistance % peel retention after 24 hour soak = 100%
- Release liner systems: Single Liner: No. 4--76# Bleached lay flat; No. 5--60# Natural lay flat; No. 7--60# Bleached kraft; No. 8--80# Bleached kraft
Adhesive Tape Applications
- Nameplates, faceplates, bonding to low surface energy plastics
- Foam gasketing or sound attenuation
- Application of decorative parts
- Applications where high initial adhesion is required
Adhesive Tape Colors
- Amber
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.