Budnick Converting ®
Scapa Tapes North America
UB2070
Unsupported Pressure Sensitive Adhesive Film
Unifilmr UB2070 is a 2 mil, unsupported pressure sensitive adhesive film. It is primarily used where high initial adhesion is required, foam gasketing and sound attenuation.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 93 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | -50° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Available on a variety of liners to meet customer requirements
- Adhesive film laminates well to a variety of substrates, including untreated polyolefins
- Adhesive gives immediate high bonds
- Performs well over a wide temperature range
- Adhesive is water clear and has excellent UV resistance, and humidity resistance
- UB Series has UL recognition to UL standard #969 for Marking and Labeling Systems
- Approved by G.E. for use on Lexan®
- Peel adhesion (PSTC 1 Mod./180°) to untreated Polypropylene: 20 min. @ RT = 50 oz/in
- Holding Power (PSTC 7 Mod./178°) 2.2 psi (1x1x1000g) @ RT: > 24 hours
- Humidity resistance % peel retention after 1 wk. @ 100°F (38°C)/100% RH: = 100%
- Water resistance % peel retnetion after 24 hour soak: = 100%
Adhesive Tape Applications
- Nameplates, faceplates, bonding to low surface energy plastics
- Foam gasketing or sound attentuation
- Application of decorative parts
- Applications where high initial adhesion is required
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.