Budnick Converting ®
tesa tape inc
4657
Temperature Resistant Surface Coated Cloth Tape
4657 is an 11.5 mil, plastic coated cloth used in vehicle high temperature paint masking, whenever high stress such as paint solvents, easy removal after high temperatures and conformability is needed. Not suitable for brush washing processes with dichlorodifluoromethane or Freon 12.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Vinyl Coated Cloth |
|---|---|
| Adhesive | Rubber |
| Thickness | 11.5 Mils |
| Tensile | 50.00 lbs/in |
|---|---|
| Elongation | 7.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp |
Product Features
- Heat resistant masking during the production of vehicles and machines (for screw tap holes, flange surfaces and drainage boreholes) Multiple stage oven drying is also possible
- Partial masking during treatment with impregnating agents (base corners remain as bare metal)
- Partial masking electrostatic powder coating
Adhesive Tape Applications
- Resistance to high temperatures. Values obtained in practice: up to 212°:F= constant resistance, up to 320°:F =two hours 350°:F and over = 0.5 hours
- Removal of the tape without any residue (it is advisable to remove while warm)
- Highly resistant to aging
- High resistance to paint solvents
- Varnishing & Electroplating
- protecting printed circuit boards
- Protection of multiple contact strips and riveted connectors
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.