Budnick Converting ®
tesa tape inc
52015
Foam Platemounting Tape for Flexography
52015 is a 60.5 mil, double-coated foam platemounting tape for high quality flexographic printing. Specifically designed for mounting thin photopolymer plates, the closed cell foam is highly compressible and offers an improved print quality. It ensures a consistent high quality print, even on extended runs. The plate and tape can be easily repositioned and demounted without residues and plates stay securely in place during printing with no edge lifting.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 60.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 12 oz/in |
| Adhesion (unwind) | 23 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Closed cell PE foam
- The lightly structured PPliner prevents the formation of air bubbles during the plate mounting process
- Specifically designed for mounting this photopolymer plates
- The closed cell foam is highly compressible and offers an improved print quality
- Ensures a consistent high quality print, even on extended runs
- Plate and tape can be easily repositioned and demounted without residues
- Plates stay securely in place during printing with no edge lifting
Adhesive Tape Applications
- Platemounting tape for high quality flexographic printing
- Specifically designed for mounting thin photopolymer plates
Adhesive Tape Colors
- White
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.