Budnick Converting ®
tesa tape inc
66013
Low VOC AdhesiveLaminating Tape
tesa® 66013 Low VOC is a 5mil reinforced water-based acrylic adhesive layer with PET scrim for mounting in automotive interiors
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5.11 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 150.74 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 356° F |
| Max Long-Term Temp |
Product Features
- very low total VOC values and no critical substances detectable
- Suitable for die cutting
- Suitable for rough surfaces
- High initial tack and peel adhesion
- High conformable design following 3D shapes
- Scrim provides a reinforcement of flexible substrates for improving converting efficiency and handling
- Suitable for the bonding to nonpolar plastics, foams, felts, and fabrics
- Provides excellent conformability and stability
- Provides excellent initial adhesion to a wide variety of interior substrates
Markets Served
- Appliance
- Automotive
- Construction
- Industrial
- Commercial
- Signage, Banners, & Printing
Adhesive Tape Applications
- mounting of plastics as well LSE plastics with difficult wet-out
- Mounting of plastics as well LSE plastics with permanent low load
- Lamination or mounting of critical, soft, light and smooth surfaces / sheets
- Mounting of plastics as well LSE plastics with difficult wet-out
Adhesive Tape Colors
- Transparent
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.