Budnick Converting ®
tesa tape inc
7319
***Discontinued*** Platemounting for BASF Nyloflex
***Discontinued by tesa *** 7319 is a 10 mil, double coated polypropylene film specifically designed for mounting MA III and ME plates from BASF. The specially designed adhesive and good shear resistance ensures a secure bond particularly to MA III and ME plates, without edge lifting or plate movement even at high machine speeds and on extended print runs. Tape and plate are easily repositioned during mounting as the full adhesive strength of the tape only becomes effective during the print run. The structured liner prevents the formation of air bubbles when mounting plates and they can be easily demounted and the tape removed from the cylinder without leaving any residue.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 10 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Specifically designed for mounting MAIII and ME plates from BASF
- Good shear resistance
- Repositionable
Adhesive Tape Applications
- Platemounting tape for mounting BASF nyloflex multilayer plates
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.