Budnick Converting ®
tesa tape inc
HAF 8410 HS
Heat Activated Film
tesa HAF 8410 HS is a 2.4 mil, heat activated film without a carrier. It is used for high strength, permanent bonding. It has good heat and chemical resistance.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Rubber |
| Thickness | 2.4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Heat |
| Adhesion (unwind) |
| Min. Application Temp | 100° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Heat activated film without a carrier
- 4354 lbs/sq.in
- Best before: 12 months @ < 77°F, 15 months @ < 59°F, 18 months @ < 41°F
- Once activated it has the highest bonding strength
- Dimensionally stable
- Good heat and chemical resistance
- Extended shelf life versus typical heat activated films
- Lifelong flexibility due to high rubber content
Markets Served
- Electronics
- Appliance
- Automotive
Adhesive Tape Applications
- Designed for the embedding of chip-modules into smart cards with high security and long life requirements
- High strength bonding, principally of heat and compression resistant materials such as metals, plastics, woven materials, ceramics and friction linings
- Continuous bonding of cardboard, glass fibre, foils and plastic parts
- Bonding of plain bearings
- Particularly suitable for work pieces with smooth surfaces requiring permanent bonding
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.