Budnick Converting ®
Venture Tape Corp. / 3M
3884
***Discontinued Flame Retardant Adhesive Transfer
***Discontinued ask about 3M alternative 3884 is a 4 mil premium performance unsupported acrylic transfer adhesive film, with built-in flame retardant properties. This high performance acrylic system exhibits excellent adhesion to a wide variety of materials. Has excellent oxidation and U.V. resistance for both interior and exterior application. Heavier thickness will provide for improved conformability on irregular, rough or mismatched surfaces.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 75 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -50° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp |
Product Features
- Built-in flame retardant properties
- Excellent adhesion to a wide variety of materials
- Excellent oxidation and U.V. resistance for both interior and exterior application
- Meets Federal Aviation Administration Test requirements: FAR 25.853(b) and Appendix F and Amendent 25-51 (3/6/80)
- Heavier thickness will provide for improved conformability on irregular, rough or mismatched surfaces.
Adhesive Tape Applications
- Primarily used for mounting interior aircraft wall covering panels made of Tedlar, Vinyl, Polyester, Fiberglass reinforced plastics, etc. where excellent flame retardant properties and high holds and heat resistance are required
- Used for high performance laminating and mounting of nameplates, decals and other decorative trim and high performance foams.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.