Budnick Converting ®
3M
5700
Safety Stripe Tape
A 5.4 mil. tape consisting of vinyl backing and rubber adhesive used for safety markings such as identifing traffic areas and physical hazards. 5700 resists most common solvents, but care must be taken to avoid ketones, ester and chlorinated hydrocarbons, which may cause the backing to swell or degrade in the intended product application. Avoid using this tape on highly plastizied materials which may result in adhesive softening and subsequent adhesion failure of tape.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Rubber |
| Thickness | 5.4 Mils |
| Tensile | 15.00 lbs/in |
|---|---|
| Elongation | 170.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 19 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 170° F |
| Max Long-Term Temp |
Product Features
- 4.2 mil. polyvinylchloride tranparent backing
- 1.2 mil. rubber adhesive
- Black and white striped backing
- Clear vinyl over colored stripes protects stripes from abrasion
- Promotes awareness of hazardous areas
- Longer life than many surface printed products
- Long expected life before re-taping
- Resists snagging often associated with thicker products
Adhesive Tape Applications
- Excellent for many lane and safety marking applications
- Identifies hazardous areas
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.