Budnick Converting ®
3M
8132LE
Double Linered Adhesive Transfer Tape
A 2.0 mil. acrylic adhesive that provides a very high bond strength to most surfaces, including excellent bond to low surface energy plastics such as polypropylene and powder coatings. Tape 8132LE offers excellent adhesion to lightly oiled surfaces and an extremely smooth adhesive for excellent graphics appearance. This product is double linered for selective die-cutting.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 75 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 200° F |
Product Features
- 3M 300LSE high-strength acrylic adhesive
- 2.0 acrylic adhesive
- 4.0 mil. and 6.5 mil. paper liner
- 90° peel adhesion to ABS: 79 oz./in.
- 90° peel ahesion to polypropylene: 74 oz./in.
- Resistant to chemicals including oil, mild acids and alkalis
- High humidity has minimal effect on bond strength
- Resistant to UV exposure and immersion in water
- Very high bond strength to most surfaces
Adhesive Tape Applications
- Plastic nameplates or graphic overlays for use on low surface energy plastics
- Waste removed nameplates on a common sheet for ease of application
- Attaching membrane switch assemblies to powder coated surfaces and low surface energy plastics
- Attaching identification material to lightly oiled surfaces, typical of machine parts
- Graphic overlays with end tabs for easy liner removal
- Graphic application to surfaces such as wood, fabric and plastic
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.