Budnick Converting ®
3M
8922
***Discontinued*** Filament Tape
Discontinued A 7.0 mil. high performance off-white tape reinforced with high strength glass filaments. The tape is designed to hold appliance parts together during manufacture and shipping. The adhesive system is specifically designed to provide high adhesion, excellent holding properties, high internal strength to resist transfer to appliance parts, and good stain resistance. The Scotchpar™ film backing provides excellent abrasion, moisture, and scuff resistance.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 7 Mils |
| Tensile | 380.00 lbs/in |
|---|---|
| Elongation | 3.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 65 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Pressure-sensitive adhesive
- Scotchpar™ backing
- Special transfer-resistant adhesive formulation
- Smooth adhesive surface
- Glass filament reinforcement
- Less flexible tape
- Abrasion and moisture resistant
- Printable by print seal process
- High initial adhesion
- High shear strength
- Transfer resistant
- Stain resistant to most synthetic enamel and lacquer finishes
- Nearly complete contact with application surface
- High tensile strength and impact coupled with low stretch under stress
- Easy to dispense and handle during application when used with 3M dispensers
- Excellent protection of filaments and adhesive to allow use of less tape
- Provides advertising and warning capability when printed
- Good holding under stess with minimum amount of tape and applicatin effort, yet allows easy removal without excessive adhesive residue, or stain
- Doors and other movable parts are held securely in place to guard against damage
Adhesive Tape Applications
- Application is most easily accomplished at room temperature
- Lower temperatures, approaching 32°F, the adhesive becomes firm
- Once applied, the tape performs well throughout the normal temperature ranges typically encountered by packaged products in shipping and storage environments
Adhesive Tape Colors
- Clear
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.