Budnick Converting ®
3M
9832
Double Coated Acrylic .5 mil PET
9832 is a 4.8 mil, double coated tape with a thin, polyester film carrier and 300MP, solvent free acrylic adhesive. It is commonly used in wood, foam, fabric & foam lamination. 9832 is best suited in applications that require temperature performance up to 250°F for short term exposure. The carrier provides dimensional stability and improved handling. Available as 9832HL with a thicker liner (83#, 6.2mil) for improved lay-flat properties and moisture stability.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4.8 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 86 oz/in |
| Adhesion (unwind) | 86 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp | 150° F |
Product Features
- 3M 300MP adhesive is a high strength acrylic
- Available as 9832HLwith a thicker liner (83#)for improved lay-flat properties and moisture stability
- Excellent adhesion to a wide variety of substrates including foams, plastics, foil & felt
- Solvent free adhesive
- Shear- 2289 minutes, 1,000 grams at 72 deg. F, .5 sq. in. ASTM D3654
- Adhesion- 90 degree- ABS = 58, Polycarbonate = 66, PP = 34 oz./in.
Adhesive Tape Applications
- General purpose foam lamination
- General purpose lamination for fabricated parts
- Woodworking- particle board, melamine, HPL, & plywood
- Woodworking- edge banding, refacing cabinets, applying wood veneer, drawer front & card holder mounting, & creating jigs
- Foam and vinyl board
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.