Budnick Converting ®
Banner Ups® by Budnick
STARTKT4AS-1
Banner Ups® Starter Kit with Clear PowerTape®
The Banner Ups® standard 4AS-1 starter kit is designed as an ultra low cost and easy way to use and test the Banner Ups® system. Each kit includes 1 roll 1.5" x 36 yd. clear, single-sided PowerTape® , a pack of 100 clear BravoTabs® , and 1 EZPunch™ tool. Everything you need to make up to 25 banners Faster, Stronger, and easier than using grommets and folding and sewing hems. With the Banner Ups® system you can make a banner in just 3 minutes. Just stick the BravoTabs® along the banner edge or corner, apply the clear PowerTape® over the tabs, punch your hole & hang your banner.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Product Features
- Faster, Stronger, Easier than Grommets
- Makes up to 25 banners
- No more grommet tear out
- No more folding hems
- Make a banner in 3 minutes
- No grommet or sewing machine costs
- No loop clear tabs are great for corners and edges
- Clear BravoTab® are great for two-sided banners
- Clear, single-sided PowerTape® reduces edge curl
- 100 each crystal clear BravoTabs®
- 1 roll of super strong single sided PowerTape® 1.5"x36yd
- 1 banner hole EZ Punch
Markets Served
- Signage, Banners, & Printing
Applications
- Banner making and hanging
- Trial test for banner makers
- Low cost entry for banner distributors
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.